FilterStream AIRTAMER A600 - Manual (Page 9)

Page 7 makes life better!
Set-Up & Operation
Unit Set-Up
Unpack the unit and make sure that any and all tape and protective 1.
wrap is removed from the unit.
NOTE:
your airTamer® is shipped WiTh a cerTified airTamer®
air filTer iNsTalled iN The uNiT. please remove The air
filTer plasTic WrappiNg before firsT use.
Remove the 2. AIR EXIT GRILL by pushing
down on the AIR EXIT GRILL TABS (2a)
and pulling the AIR EXIT GRILL away from
the unit (2b).
Remove the
3. AIR FILTER by firmly gripping
the sides of the AIR FILTER and pulling the
AIR FILTER out of the unit.
Remove the plastic wrap protecting the filter.
4.
Mark the suggested month of 5. AIR FILTER
replacement on the AIR FILTER by checking
off the appropriate month (e.g. If it is
suggested that the AIR FILTER be replaced
in 6 months and you install the AIR FILTER
on January 1st, put a check in the box beside
the letter representing the month to replace
– in this case July).
2a
5
2b
3
HW_A600_UserMan_ENG_09.indd 7 5/11/09 2:25:03 PM