Furuno DS-60 - Manual (Page 28)

2. NAVIGATION DATA DISPLAY
2-8
2.2.6 Wind averaging time
Set the wind averaging time in minutes. Select [No Averaging] for no averaging. The
higher the time, the smoother the wind data, but response to the changes in wind
speed and angle slows.
1. Press the MENU/ESC key to open the menu.
2. Select [Wind Average] then press the ENT key.
3. Select a value then press the ENT key.
4. Press the DISP key to close the menu.
2.2.7 ROT sensor
Select the ROT sensor as follows:
1. Press the MENU/ESC key to open the menu.
2. Select [ROT Sensor] then press the ENT key.
3. Select a source then press the ENT key.
[Internal]: Select this item if the optional Rate-Of-Turn-Gyro DS-340 is connected.
[External ROT]: Receive ROT data from external ROT sensor.
[External HDG]: Receive ROT data from gyrocompass or heading sensor.
4. Press the DISP key to close the menu.