FUJITSU SCANSNAP FI-5110EOXM - Manual (Page 17)

6. Replacing Consumables
This chapter describes how to replace consumables.
WARNING
Fire/Electric Shock
Before you replace the consumables of this scanner,
disconnect the AC adapter from the outlet to turn off the
scanner.
6.1. Part Numbers and Replacement
le of Consumables Cyc
The following table lists the part numbers of consumables
and shows rough guidelines for replacing these parts.
No. Description P/N Replacement Cycle
1
fi-5110EOX
Pad ASSY
PA03360-0002
50,000 scan or one
year
2
fi-5110EOX
Pick roller
PA03360-0001
100,000 scans or
one year
These replacement cycles are rough guidelines when
A4/Letter wood-free paper 64 g/m
2 (17 lb) is used. The
actual cycle may differ depending on the scanned paper.
Use only the consumables specified by PFU LIMITED.
HINT
To estimate when the consumables will have to
be replaced and to get an overlook of the
already scanned pages, please refer to the
following:
1. Click and hold the "ScanSnap Manager" icon at
the Dock menu
2. Select [Check consumable supplies] at the menu.
Ö The screen ("Check consumable status" window)
that indicates how many times consumables have
been used will be displayed.
Replace the consumables referring to "Target
to change supplies" as a rough guideline.
For details about consumables and where to
purchase them, visit the following Website or
contact the store where you purchased your
scanner.
[Website]
http://scansnap.fujitsu.com/
6.2. Replacing the Pad ASSY
Replace the Pad ASSY following the procedure below.
1. Remove the documents on the Paper chute cover.
2. Open the ADF cover while pulling the Cover open
lever.
3. Remove the Pad ASSY.
Pull out the Pad ASSY in the direction of the arrow
while holding both ends of the Pad ASSY.
4. Attach the new Pad ASSY.
ADF cover
Paper chute
cover
Cover open lever
Pad ASSY
ADF cover
Pad ASSY
ADF cover
ScanSnap fi-5110EOXM for Macintosh Getting Started | 15