FUJITSU M3097G User Manual
M3097g image scanner oem manual
Advertising
Table of contents
Document Outline
- M3097G IMAGE SCANNER OEM MANUAL
- REVISION RECORD
- CONTENTS
- CHAPTER 1 GENERAL
- CHAPTER 2 SPECIFICATIONS
- CHAPTER 3 CONFIGURATION
- CHAPTER 4 INTERFACE
- 4.1 Physical Specifications
- 4.2 SCSI Bus
- 4.3 Bus Phases
- 4.4 Commands
- 4.4.1 RESERVE UNIT command
- 4.4.2 RELEASE UNIT command
- 4.4.3 INQUIRY command
- 4.4.4 REQUEST SENSE command
- 4.4.5 SEND DIAGNOSTIC command
- 4.4.6 TEST UNIT READY command
- 4.4.7 SET WINDOW command
- 4.4.8 SET SUBWINDOW command
- 4.4.9 OBJECT POSITION command
- 4.4.10 SEND command
- 4.4.11 READ command
- 4.4.12 MODE SELECT (6)
- 4.4.13 MODE SENSE (6)
- 4.5 Status: STATUS phase (target –> initiator)
- 4.6 Messages
- 4.7 Command Sequence
- 4.7.1 Initial sequence
- 4.7.2 Command sequence to read
- 4.7.3 READ command sequence
- 4.7.3.1 Single READ (without CMP II option: disconnect disabled)
- 4.7.3.2 Single READ (with CMP II option: disconnect disabled)
- 4.7.3.3 Single READ (with CMP II option: disconnect enabled)
- 4.7.3.4 Multiple READ (with CMP II option: disconnect disabled)
- 4.7.3.5 Multiple READ (with CMP II option: disconnect enabled)
- 4.8 Status Transition of Logical Unit
- 4.9 Error Table
- 4.10 Items for Specifying Window and Subwindow
- APPENDIX A PAPER SPECIFICATIONS
- APPENDIX B ADF SCANNING SPEED
- APPENDIX C DROP- OUT COLOR
- APPENDIX D DIFFERENCES BETWEEN THE M3097G AND M3096G IMAGE SCANNERS
- Reader Comment Form