FUJITSU M3097G - Manual (Page 126)

4.7.3.3 Single READ (with CMP II option: disconnect enabled)
Request image data (TL).
(one page) READ command
Start scanning.
Data volume
< Min(TL>M or 64 KB)
Disconnect
(M=0 before scanning)
Data volume f TL>M
(only for disconnected case)
Reconnect
Wait for following
condition is satisfied.
TL>M > Data volume
f 64 KB
(only for disconnected case)
Reconnect
or
Image data
(64KB ¥ N)
Send image data.
M = M + 64 KB ¥ N
Saved data pointer
Wait for following
condition is satisfied.
Data volume
f Min(TL>M or 64 KB)
Disconnect
or or
See Notes 1 and 2.
Command completion
Send image data.
Image data (TL>M)
Min (TL>M or 64 KB): Either TL>M or 64 KB which is smaller.
4 $ 101