FUJITSU M3097G User Manual
Page 27
Advertising
SCSI ID: 0 to 7, variable by EEPROM: default is 5.
Logical unit number (LUN): 000, fixed
(2) Bus
phases
All phases are supported.
(3) Commands
The following commands are supported by this scanner:
f INQUIRY
f OBJECT
POSITION
f
MODE SELECT
f
MODE SENSE
f READ
f RELEASE
UNIT
f REQUEST
SENSE
f RESERVE
UNIT
f
SEND
f SEND
DIAGNOSTIC
f SET
SUBWINDOW
f SET
WINDOW
f
TEST UNIT READY
A control byte is not supported. If the value other than X©00π is specified, an error
is generated.
(4) Statuses
The following statuses are supported by this scanner:
f BUSY
f
CHECK CONDITION
f GOOD
f RESERVATION
CONFLICT
4
$ 2
Advertising