FUJITSU M3097G - Manual (Page 155)

D.1.1.7 Lamp timer function
f Functions
- This function specifies how long the lamp will stay on.
- This must be specified with Mode select (Page code=Xπ3Dπ).
Format of Page Code Xπ3Dπ
Parameter length = Xπ06π
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
f Parameter Byte 2
Xπ00π: The default value is 60 seconds for this scanner.
Xπ01π to XπFFπ: Specifiable between 1 to 255 seconds (XπFFπ)
Reserved Page code = Xπ3Dπ
Parameter
Reserved
D.1.1.8 Added sense code
Following sense code are added.
The blown lamp fuse;
™Sense key=Xπ04π, Add.sense code=Xπ80π, Add.sense qualifier=Xπ03π∫.
Interlock switch is opened;
™Sense key=Xπ02π, Add.sense code=Xπ80π, Add.sense qualifier=Xπ01π∫.
D $ 10