FUJITSU M3097G - Manual (Page 124)

Target Initiator
SEND Halftone pattern download
Load document on ADF
(Not required if ADF is not used)
OBJECT POSITION
READ command sequence Start scan/transfer
See item 4.7.3 for the READ command sequence.
Unload document from ADF (OBJECT POSITION)
(if necessary)
(Not required if ADF is not used)
(Not required if ADF is used, because document is unloaded automatically.)
RELEASE UNIT Release reserve state
4.7.3 READ command sequence
4.7.3.1 Single READ (without CMP II option: disconnect disabled)
Request image data (TL).
(one page)
READ command
Start scanning.
See Notes 1, 2, and 4.
Command completion Send image data (TL).
4 $ 99