FUJITSU M3097G - Manual (Page 71)

(o) Compression type, argument: Bytes 20 to 21
Specifies the compression method that is applied before the read data is sent
to the initiator
TYPE (Byte 20) argument (Byte 21)
00 % Not compressed Reserved
01 % MH Reserved
02 % MR K parameter
03 % MMR Reserved
When the CMPII option is not connected, if a value other than the ™Not
compressed∫ is specified, this scanner returns the following error
information:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
4 $ 46