FUJITSU M3097G User Manual
Page 72
(p) Vender unique parameter (byte 28 and after)
Specifies, in byte 28 and after, a vender unique parameter, including items
such as subwindow list, outline, emphasis, automatic separation, mirroring,
and paper size, as required. This parameter is specified in the following
format. This parameter does not need data until byte 3F. (It is unnecessary
to transfer the unnecessary parameter, but the intermediate parameter
cannot be omitted.)
Subwindow list
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
39
3A
3D
3E
3F
7
6
5
4
3
2
1
0
Vender unique identification code
pattern
Outline extraction
Image emphasis
Automatic separation
Mirror image
Variance rate
Not supported
White level follower mode
(MSB)
(LSB)
Paper size
(MSB)
Paper width X
(LSB)
(MSB)
Paper length Y
(LSB)
DTC selection
Reserved
DTC mode
•
Vender unique identification code: byte 28
Specifies a vender unique identification code. For this scanner, X‘00’
must be specified. If other value is specified, this scanner returns the
following error information:
•
Status:
B‘00001’ (CHECK CONDITION)
•
Sense key: X‘5’ (ILLEGAL REQUEST)
4 – 47