FUJITSU M3097G - Manual (Page 85)

f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
(b) Upper left X, Y (ULX, ULY) : Bytes 6 to 9, A to D
Specified here are the X and Y coordinates of the upper>left corner of the
subwindow. The coordinates are expressed in units of 1/1200 inches relative
to the upper>left corner of the maximum scan area.
(c) Width, length (W, L) : Bytes E to 11, 12 to 15
Specified here are the width and length of the subwindow, in units of 1/1200
inches.
Notes:
1. If the area specified for any subwindow does not fit in the area of the main
window, the portion of the area outside the main window area is ignored.
Only the portion where the main and subwindow overlap (shown hatched) is
processed.
Main Window
Sub window
Sub Window
2. If subwindows in a main window overlap with each other as a result of the
values ULX, ULY, W and L specified here, this scanner returns the
following error information:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
Example:
¨ Overlapped portion
Main Window
Sub
window
Sub
window
4 $ 60