FUJITSU M3097G - Manual (Page 159)

D.2.3.5 Simplified DTC
- M3096G: If the threshold value in the Set window parameter is 0, the
Simplified DTC function is operable. However, this is available
only if the IPC option has been installed. This function allows
specification of the Variance rate.
- M3097G: If the threshold value in the Set window parameter is 0 and the
value of the DTC SELECTION byte is specified as a number
between Xπ00© or Xπ80π, the Simplified DTC function is
operable.However, this is available only if the IPC II option has
been installed. This function allows specification of the Variance
rate.
D $ 14