FORD Ranger User Manual
Page 222
222
[RE02300(ALL)08/94]
10-1/2 pica
art:0021186-B
Attaching jumper cables
*
[RE02500(ALL)03/95]
Jump-Starting
*
[RE02600(ALL)03/95]
1.
Make sure that the jumper cables are not in the way of
moving engine parts, then start the booster vehicle. Run the
engine at a moderate speed.
*
[RE02700(ALL)03/95]
2.
Let the discharged battery charge for a few minutes and then
start the disabled vehicle. It may take a couple of tries before
the vehicle starts. If the vehicle does not start after several
attempts, there may be a different problem.
*
[RE02800(ALL)03/95]
3.
When both vehicles are running, let them idle for a few
minutes to charge the discharged battery.
%
*
[RE02900(ALL)03/95]
Removing jumper cables
*
[RE03000(ALL)03/95]
1.
Always remove the jumper cables in the reverse order.
Remove the negative (
Ҁ) end of the jumper cable from the
metallic surface on the engine or frame of the disabled
vehicle.
*
[RE03100(ALL)06/95]
2.
Remove the negative (
Ҁ) cable from the booster battery.
*
[RE03200(ALL)06/95]
3.
Remove the positive (+) cable from the booster battery.
File:12unrer.ex
Update:Wed May 1 13:53:18 1996