FORD Ranger - Manual (Page 77)

76
* [IP01700(ALL)03/95] H Fan speed adjustment
[IP01750(ALL)03/95] The H (left) knob on the control is the fan control knob which
controls the volume of air flow. Rotate the H knob to the right
to increase fan speed and increase the amount of air entering
the vehicle. Four fan speed positions are available and are
indicated by dots beside the
H control knob. The largest dot is
high speed position.
* [IP01800(ALL)08/94] Airflow selections
[IP01850(ALL)08/95]
Q (Panel)
[IP01900(ALL)03/95] Use Q to bring outside air through the instrument panel
registers. You can heat the air in this position by rotating the
temperature knob into the red area. The air CANNOT be cooled
below the outside temperature regardless of the temperature
knob setting. Select A/C or MAX A/C to get cool air through
the instrument panel registers.
* [IP01950(ALL)08/95] A/C
[IP02000(ALL)06/94] Select A/C to get refrigerated outside air through the
instrument panel registers. The A/C position is used for cooling
except when it is extremely hot or fast cooling of the vehicle is
needed. Then, select MAX A/C for fast cooling and return to
A/C when you are comfortable.
* [IP02050(ALL)08/95] MAX A/C
[IP02100(ALL)05/95] The MAX A/C position produces cool air more rapidly to
provide faster cooling of your vehicle. This is possible because
cooler air is drawn from inside the passenger area and
refrigerated again instead of using warmer outside air. Using
inside air will also make the fan sound louder and is normal
when using MAX A/C. The air flow will be from the
instrument panel registers.
File:06unipr.ex
Update:Wed May 1 13:46:22 1996