Furuno FM-8500 - Manual (Page 14)

10
Mounting procedure for tabletop, overhead and
bulkhead mounting
1. Using the hanger as a template, mark fixing holes in the mount-
ing location.
2. Fix the hanger to the mounting location with wood screws and
washers (supplied). (For added support, use nuts, bolts and wash-
ers instead of wood screws.)
3. Screw the knob bolts with washers into the transceiver unit.
4. Set the transceiver unit to the hanger and tighten knob bolts.
• All dimensions in millimeters.
• For added support, fasten hanger with nuts, bolts and wash-
ers (local supply) instead of wood screws.
• Leave sufficient space at the sides and rear of the unit to
provide easy access for maintenance and service. The mini-
mum service clearance is shown in the figure.
Figure 2 Mounting dimensions for tabletop, overhead and bulkhead
mounting