FujiFilm PRO 800Z AF3-177E - Manual (Page 7)

– 7 –
FUJICOLOR PRO 800Z PROFESSIONAL • FUJIFILM PRODUCT INFORMATION BULLETIN
15. FILM STRUCTURE
14. TECHNOLOGIES INCORPORATED IN
FUJICOLOR PRO 800Z PROFESSIONAL
14-1 4 th Color Layer Technology
This film incorporates a fourth color-sensitive layer in
addition to the conventional three RGB-sensitive layers
in order to reproduce colors as they are perceived by
the human eye. The optimized spectral characteristics
of this film enable the rendition of natural colors even
for photographs taken under fluorescent lights or mixed
light sources.
14-2 New Optimizes Interlayer Effect Technology
The control provided by the new optimized interlayer
effect technology incorporated in this film makes
possible faithful color reproduction, superbly vivid skin
16. DIFFUSE RMS GRANULARITY VALUE
.....
5*
Micro-Densitometer Measurement Aperture
: 48
µ
m in diameter
Sample Density: +1.0 above minimum density
* Based on Fujifilm measurements. Due to difference in measure-
ment conditions, comparison with color reversal film is not pos-
sible.
17. RESOLVING POWER
Test-Object Contrast: 1.6:1 ............. 50 lines/mm
Test-Object Contrast: 1000:1 .......... 115 lines/mm
tones, and highly consistent gradation that is smoothly
continuous from the highlights to the shadows
whatever the situation.
14-3 Fine
∑
(Sigma) Technology
Fine
∑
(Sigma) Technology provides a new thin, flat
grain structure that effectively increases the overall
surface area of the small-volume silver halide crystals,
producing higher uniformity among silver halide crystal
clusters and making possible the attainment of high
film speed without any noticeable increase in grain size.
The result is a film that produces excellent textures,
regardless of the film’s high ISO 800 speed rating.