Swing operation, En-11 – Friedrich MW30C3G User Manual
Page 12
En-11
To select SWING Operation
Press the SWING button (Fig. 6 S).
The SWING Display (Fig. 7 a) will light.
Each time the SWING button is pressed, the swing operation will change in the following
order.
To stop SWING Operation
Press the SWING button and select STOP.
Airfl ow direction will return to the setting before swing was begun.
SWING OPERATION
Begin air conditioner operation before performing this procedure.
Up/down swing operation
Left/right swing operation
Swing operation stops
Up/down/left/right swing operation
About Swing Operation
● Up/down swing: Swing operation begins using the following
range according to the current airfl ow direction.
Airfl ow direction is 1–4 (for cooling, dry).
With the upper airfl ow-direction louver in the horizon-
tal position, the lower airfl ow-direction louver moves
(swings) to direct airfl ow to a wide area.
● Left/right swing: The airfl ow-direction louvers move (swing)
in the left/right airfl ow direction.
● Up/down/left/right swing: The airfl ow-direction louvers move
(swing) in both the up/down and left/right airfl ow directions.
●
The SWING operation may stop temporarily when the air
conditioner’s fan is not operating, or when operating at very
low speeds.
●
If the SET button(Vertical) is pressed during the up/down
swing operation, the up/down swing operation will stop and
if the SET button(Horizontal) is pressed during the left/right
swing operation, the left/right swing operation will stop.
9315345394_OM.indb 11
9315345394_OM.indb 11
9/30/2010 2:44:24 PM
9/30/2010 2:44:24 PM