Maintenance, Clearing paper jams – Fuji Labs DOCUCENTRE-II C3000 User Manual
Page 35
4-5.
If the jammed paper is inside the Fuser Unit, lift the lever on the left side to open
the Fuser Unit Cover.
6.
Hold the lever, carefully remove the paper from the machine, and then lower the
lever. Close Cover A.
MAINTENANCE
MAINTENANCE
Clearing Paper Jams
Paper Jams in the Document Feeder
1.
Open the DADF Cover.
2.
Remove the jammed paper. If necessary, turn the
green wheel
to feed the
jammed paper out of the DADF.
3.
If a document is jammed underneath the inner cover, open the cover and turn
the
green wheel
to remove the jammed paper. Close the inner cover, and then
close the DADF Cover.
Paper Jam Behind Cover A
If paper is torn, make sure to
remove any torn pieces of paper
inside the machine.
Note
1
2
3
Paper Jams
1-2.
Open Paper Tray 5 (Bypass Tray), which is located on the left side of the machine.
Lift up on the Cover A, release lever to open the cover.
3.
If the jammed paper protrudes from behind the Fuser Unit, rotate the lever on the right
side in the direction of the arrow to feed the paper.
4.
Pull out the paper from the machine in the direction of the arrow.
3
1
2
6
4
5
WARNING: The Fuser Unit may be hot!
Be careful not to touch the unit.
34
34