Fuji Labs DOCUCENTRE-II C3000 - Manual (Page 38)

Replacing Toner Cartridge
Paper Jams
Replacing Consumables
Important - before replacing new toner cartridge:
i) Press [Machine Status] button on the Control Panel.
ii) Select [Supplies] tab. Select the Toner Cartridge to be replaced
iii) Select [Replace Cartridge] button.
iv) The Toner Cartridge rotor will automatically rotate toner into the position required.
v) The ‘Replace Cartridge’ screen will be displayed.
1. Ensure machine is idle before opening Front Cover. Open the Toner Cartridge Door
2. Gently remove the used toner cartridge. Remove new toner cartridge from its box
and gently shake cartridge 3 - 4 times from side to side.
3. Align the arrow on the cartridge with the arrow on the machine, and gently push the
cartridge all the way into the machine until it locks into position. Close the Toner
Cartridge Door. Close the Front Cover
1 2 3
37 37