Farenheit Technologies DVD-19 - Manual (Page 16)

-16-
ADVANCED OPERATION
Program playback (Audio-CD)
You can playback chapter, title,or tracks repeatedly.
Set this function during playback.
PRESET : Press REPEAT button when title,
chapter, folder or song for repetition is played.
Repetition play mode changes as shown
below whenever you press this button and
relevant mode appears in TV screen.
In case of DVD:
In case of CD:
To release Repetition Play Mode and start
normal play, repetitively press REPEAT button
until “REPEAT OFF” is displayed in TV screen.
Setting the Repeat A-B playback
1. Press A-B button during play at the point
where repeat play is to start(A)
2. Press A-B during play at the point where
repeat play is to be concluded(B)
3. To cancel it press A-B button again.
Notes
Repeat play works only with discs for which
the elapsed playing time appears in the DVD
display window during playback.
Repeat play may not works correctly with
some DVDs.
If the time from A to B is less than 3 seconds,
the player repeats about 3 seconds.
Repeat A-B play works only within a title DVD
or a track CD.
Some subtitles recorded around point A or B
may fail to appear (DVD).
During repeat playback, if you need to play a
certain track and you can select the track by
using the NUMERIC or SKIP buttons.
Depending on the discs, this function may be
different.
Press the PROGRAM button during stop mode.
Press the NUMERIC buttons as you want.
To start the program play, press the PLAY button.
To cancel the play, press the STOP button and the PROGRAM button twice. 4
3
2
1
Program playback lets to set up a specific order for playback of tracks on a disc.
Repeat playback
: Chapter Repetition Play Mode
: Title Repetition Play Mode
: Release(Normal Play)
(“REPEAT” is off)
: Song repetition mode
: Disc Repetition Play Mode
: Release (Normal play)
(“REPEAT” is off)