Fisher-Price H5985 - Manual (Page 3)

3
Assembly
• Position each side rail so that the button faces outward.
• Insert the seat back tube into the socket in each side rail.
• While pressing the tabs on the ends of the seat back tube,
continue to insert the seat back tube into the sockets in each
side rail, until the tabs “snap” into place. Make sure you hear a
“snap” on each side.
• Pull the seat back tube up to be sure it is secure in the side rail sockets.
IMPORTANT! Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. DO
NOT use if any parts are missing or broken. Contact Fisher-Price
® for
replacement parts and instructions if needed. Never substitute parts.
Seat Back Tube
Side Rail Sockets
PRESS TABS
Button
1
• Fit the cross brace between the side rails, as shown.
Cross Brace
Side Rails 2
• Insert a screw through each side rail and into the ends of the
cross brace.
3
• Fit a retainer with lock nut onto the end of the screw and to the
inside of a side rail. Tighten the screw.
Hint: A lock nut has been factory assembled to the retainer. During
shipment, the lock nut may have fallen out of the retainer. If it has,
please fit it into the hexagonal hole in the retainer so that the rounded
side of the lock nut faces out.
• Repeat this procedure to fasten the screw in the other end of the
cross brace and side rail, using the remaining retainer with lock nut.
4