Initial setup, Basic operation, Page 10 – First Alert DigitalDVR PRO-D1610 User Manual

Page 10: Step 5 ... recording record mode

Advertising
background image

Page 10

initial setup

Basic operation

Step 5 ... recording

RECORD Mode

Configure Recording Options:

In this Menu you have three recording options: POWER UP (Continuous), TIMER RECORD (enables SCHEDULE menu) and

ALARM (within SCHEDULE menu). By default, the DVR is set to record continuously. Set parameters as follows:

1. From the Main Menu click RECORD. Under SWITCH, use the drop-down

menus and select ON/OFF to enable/disable recording from the selected

channel. Note: If SWITCH is set to OFF, then Motion Detect, Alarm and Manual

Record are also disabled for that channel.

2. BITRATE (Kbps): See table for details. Note: Resolution for this DVR is at CIF

due to the number of channels.

3. FRAMERATE: Choose the recording frame rate 1-30, (fps – frames per

second). The lower the value, the less life-like and more jerky the recorded

movements will be. However, a lower frame rate uses less HDD space. Make

your choice depending on the precision with which you want to follow the

events being recorded. Frame-rate of each channel can be adjusted but is

limited by the total resources available. The total frame rate for all channels

combined cannot exceed 420 (NTSC) fps. Note: Although the chipset is NTSC

480, part of the resources are used for other internal functions and cannot be

allocated to recording resources.

The ratios of D1, HD1 and CIF are as follows: 1 D1= 4 x CIF, 1 HD1 = 2 x CIF.

4. AUDIO, select ON or OFF. If audio recording is enabled, the system will record au-

dio from connected audio capable cameras (not included). See caution statement

on audio recording in

Video section.

5. REC. MODE, select POWER UP or TIMER RECORD. If you select POWER UP,

the system will record continuously when the system is powered on. If you select

TIMER RECORD, you have to set a recording schedule on the system.

6. REC. SIZE (Record Size), select 15MIN, 30MIN, 45MIN, or 60MIN.

NOTE: Record Size sets the file size for recorded video files on the system. Instead of recording data as one large file, the

system will divide the data into blocks of 15, 30, 45, or 60 minutes. This makes the recorded data easier to search

7. MASK FIELD lets you block a specific portion of a channel you do not want recorded or shown on the display screen. This

can be useful if you need to conceal a sensitive area being captured by the camera. See next section for details.

8. Click APPLY. Click OK in the REMARK window. Click EXIT.
Recording Schedule (TIMER RECORD)

You can program the DVR to record according to a customized recording

schedule. The Schedule Grid shows the days of the week and hour blocks 00~23.

You can set Alarm Recording (Red), General Recording (Green), or No Recording

(Blue) to each time block of each day. To set a recording schedule:

1. Open the Main Menu and click RECORD.

2. Under REC. MODE, select TIMER RECORD.

3. Click SCHEDULE. The Schedule menu opens.

4. Under CHANNEL, select specific channels or select ALL.

5. Below the grid, click either ALARM (red), GENERAL (Green), or NO RECORD

(Blue) and then click a time block on the desired day.

6. Use the FROM/TO drop-down menus to copy the schedule of one day to

another. For example, if you want your schedule for Monday to be the same

on Wednesday: under FROM select MON, under TO select WED, and then click COPY.

7. Click APPLY. Click OK in the REMARK window. Click EXIT.

Record Menu

Recording Schedule

CCTV Resolution

CCTV resolution is measured in vertical and horizontal pixel dimensions and typically
limited by the capabilities of both the camera and the recorder that you are using for
your CCTV surveillance installation. CCTV systems use an analog video signal. For
television specifications (which CCTV uses) the highest resolution that can be captured

and stored is 704 x 480 (NTSC for the United States) and 720 x 576 (PAL for Europe). This resolution
is known as D1 resolution. A high end CCTV recorder is capable of recording at up to D1 resolution.

CCTV Resolutions
D1: 704 x 480
HD1 (2CIF): 704 x 240
CIF: 352 x 240
QCIF: 176 x 120

Bitrate in Kbps

Image

Quality

Low

Medium

High

CIF

384

512

768

HD1

N/A

N/A

N/A

D1

N/A

N/A

N/A

Advertising