First Alert DigitalDVR PRO-D1610 - Manual (Page 6)

Page 6
initial setup
camera and power connections
Step 1 ... connecting devices
Video to Camera
Power to Camera
Power to 1 to 16 Cameras
VGA to PC Monitor or TV
(Monitor and Cable Not included)
RJ45 Ethernet
to Router and
Internet
PTZ & Alarm Connections
(Cameras not included)
Follow this diagram to make device connections. This diagram is for illustration purposes only. Cabling and other accessories
shown are not included with this DVR unless indicated. See “What’s in the Box” for included devices.
Power to DVR
Power
from 120V
DC Converter - 12V
(included with this DVR)
DVR Front Face
Connect Mouse &
USB Drive
Smartphone
through Mobile
Internet Setup
(Smartphone Not
included)
RCA Audio In from
2 Audio Cameras or
Powered Microphone
(Not included)
Powering Cameras
Power from each Camera Adaptor
that came with your camera.
Not included
RCA Audio Out to
Powered Speakers
(Not included)
To each DVR
Channel 1-16
BNC to Security Camera Monitor
(Monitor and Cable Not included)
BNC Video/DC Power Cable:
(1 per Camera). Note: Cables ,
Power Adaptors and Cameras
not included
Power
from 120V
~~
DC Converter - 12V
Power
from 120V
12V DC
Converter
Powering Cameras
Power from a single
Power Adaptor and 8-way
splitter. 2 required.
Not included.
Splitter -
8 camera
Power to Cameras
Note: To reduce the number of
single camera power adaptors
required, you may be able to
use a larger power adaptor
(3A or 5A) and a splitter cable.
Contact your local security
camera accessories dealer
for help in matching splitter,
cable, camera and power
adaptor requirements.