Friedrich P012A - Manual (Page 12)

10
REMOTE CONTROL
Used for adjusting the timer and •
temperature
The default display on control
•
panel is room temperature.
When the "
• " or the " "
button is pressed in cool mode,
the set temperature is displayed
and may be adjusted. After 15
seconds the display will revert
back to room temperature.
Timer setting is available from
•
1-24 hours by pressing the
button " " on " ".
Press this button to change the
operation mode in the order of:
Cool
Fan
Dehumidify
On/Off
: HIGH : MED :LOW
In running mode:
Auto switch off
In standby mode:
Auto switch on
Press the "
" or the " "
button to adjust the time setting
for 1 hour interval.
The functions work the same as your air conditioner’s touch controls.
All key function can be accessed from the remote control.
Battery replacement: Remove the cover on the back of the remote control and insert the batteries with the (+) and (-)
poles pointing in the proper direction.
CAUTION
Use only AAA or IEC R03 1.5V batteries.
Remove the batteries if the remote control is not used for a month or longer.
Do not attempt to recharge the supplied batteries.
All batteries should be replaced at the same time, do not mix old battery.
Do not dispose of the batteries in a fire as they may explode.
Air Conditioner Remote Control
Notes:
- Do not drop the remote control.
- Do not place the remote control in a
location exposed to direct sunlight.
- The remote control should be placed
about 1 meter or more away from TV,
or any electrical appliances.
Time/Temperature Set Control
Mode Control
LCD Display
Power Control
Fan Speed Control
On / Off Timer Control
Farenheit/Celsius Button