Freedom9 KVM-08P - Manual (Page 8)

Chapter 2: Installation
5
Push button function
Instruction:
You can press the button in order as shown in the diagram above. If you switch to a port without
computer connection or connected computer is powered-off, the “Port No.” LED will flash. If you
switch to a valid computer connection, the “Port No.” LED will be steady on.
Pressing the button cyclically through all the ports.
1 2 3 4 5 6 7 8
Bank No. Bank Select Port No. Port Select
Reset
Port Status
Bank Select
Port Select
Power On/Off
Bank Status