FUJITSU SPARC ENTERPRISE SERVER M9000 - Manual (Page 38)

1-26 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010
1.5 Optional Products
The following products are the main options available for the M8000/M9000 servers.
■ Power Supply Options
■ External I/O Expansion Unit
■ M9000 Server (Expansion Cabinet) Option
1.5.1 Power Supply Options
The power cabinet and the rack-mountable dual power feed option for the M8000
server are offered as power supply options.
The power cabinet enables dual power feed or three-phase power feed.
The rack-mountable dual power feed option for the M8000 server receives power
from two external AC power sources that are independent of each other, and
duplicates the input power system.
To use a single-phase dual power feed configuration for the M8000 server, mount the
rack-mountable dual power feed option in the rack space itself. This requires a rack
space with a height of 6 RUs in the cabinet. For the M9000 server, you must add the
power cabinet.
For three-phase power feed in either server, an additional power cabinet is required.
Install one power cabinet for each M8000/M9000 server.
For details, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.
Note – A three-phase power feed option can be installed only at the factory before
shipment. A single-phase power feed cannot be changed to a three-phase power
feed, or vice versa, after shipment from the factory.
TABLE 1-6 lists specifications of the power cabinet.