Fantom Vacuum FM780 - Manual (Page 13)

Reattach the lens and fasten the screws.
Caution: Be careful not to clamp the
headlight lamp wiring.
Headlight Lamp
Screw
Lens
Socket
Lamp
Socket
12
REPLACEMENT INSTRUCTIONS
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the
power cord from the wall outlet before replacing any of the parts below.
REPLACING THE HEADLIGHT LAMP
1
2
3
4
5
6
Set the vacuum cleaner to the parallel position.
Loosen the screws to remove the lens.
When removing the headlight lamp, be careful
not to pull on the headlight lamp wiring.
Remove the lamp by pushing it gently in
the direction of the arrow and then turning
it counterclockwise.
Push a new lamp gently into the socket and
turn it clockwise to tighten it.
Use a standard bayonet base appliance lamp
rated at 120V and 15W (LAMP MAX.15W).