Fantom Vacuum FM780 - Manual (Page 15)

Remove the bottom plate by pulling
the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
14
OPEN
Pull here
Bottom Plate
Bottom Plate
Projection
Groove
Nozzle Head
Height Adjustment Lever
REATTACHING THE BOTTOM PLATE
2
4
1
3
1
2
3
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle head
and set the bottom plate in place. Push the bottom plate as shown.
Set the two screws to its original place.
Turn the vacuum over and place in the
upright position.
Press
Press
CLOSE
Set the vacuum cleaner to the
parallel position and turn it over.
Unscrew the two screws as shown.