Fluke THE HART 1529 - Manual (Page 50)

printed or for all channel and memory locations. When this function is selected,
the bottom portion of the display shows the probe channel.
Use the LR buttons to select the channel, memory location, or ALL. Use the
UD buttons to scroll between parameters. Press the Enter button to continue
and to send the data to the selected port. A message is displayed stating the
channel to print and the port. Press the Enter button to print the data. Press the
EXIT button to cancel and to exit to the menu.
7.2.5 Default Probe
The DEFAULT PROBE function allows you to reset the probe coefficients for a
1529 Chub-E4 Thermometer Readout
User’s Guide
44
1
24.159C
3
24.142C
2
24.634C
4
24.015C
PROBE: CHAN1
SERIAL
PROBE:
PORT:
EXIT ENTER / MENU UNIT CONTRAST
1529 CHUB E-4 THERMOMETER READOUT
Figure 17 Print Probe