Faber Remote Blower - Manual (Page 11)

11 EN
Hood body installation
• In case of the bottom air outlet configuration the hood body has to be turned
180°.
• Remove the top cover of the terminal box by unfastening the two screws
fixing it to the hood casing.
• With the aid of pliers brake through a hole inside the terminal box
providing thus for a passage of the electrical connection for the lighting
unit.
• Place the hood body inside the built-in case paying attention
that the screws of the built-in case fall to the gaps of the
hood body.
• Once the screws have reached the gaps it is necessary to
fasten them in order to definitively fix the hood body inside
the built-in case.
• It is necessary to make sure that the hood body air outlet is
correctly in its’ position inside the air outlet of the built-
in case.