FRIGIDAIRE 137168300B - Manual (Page 13)

13
OPERATING INSTRUCTIONS
To select or delete the Energy Saver (if equipped),
Extra Rinse, Stain Clean, Extended Spin (if
equipped) or Signal Volume, press Options until the
blinking light indicates the desired option. Then, while
it is blinking, press Select. The indicator will light when
the option has been selected. It will no longer be lighted
when the option has been removed.
Not all options are available on every model or are
compatible with every cycle. The indicator will not light if
the option is not available with that cycle.
The options selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory settings, press the Start/Pause and
Select buttons at the same time and hold until the signal
sounds.
Energy Saver (on select models)
The Energy Saver option reduces the warm water
temperature a few degrees to save energy and also
extracts more water to reduce drying time.
Extra Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
sensitive skin.
Stain Clean
Use the stain clean option to add a 5-minute soak in
the middle of the wash portion of the cycle.
Extended Spin (on select models)
Use this option to add minutes to the fi nal spin at the
selected spin speed. This will improve water extraction,
decrease drying time and save energy.
Signal Volume
A signal will sound at the end of the cycle if this option
is selected. The signal has an adjustable volume level
or can be turned off.
Cycle Options
Í NOTE
To change the options once the cycle has begun, press
the pause button, make the new selection and press
start again.