Important safety instructions – Fuel Fitness FT96 User Manual

Page 4

Advertising
background image

FT96

-3-

WARNING - Read all instructions before using this appliance.
DANGER
- To reduce the risk of electric shock disconnect your FUEL treadmill from the
electrical outlet prior to cleaning and/or service work.
WARNING
- To reduce the risk of burns, fire, electric shock, or injury to persons, install the
treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet with only
the treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY
ONE OUTLET ON THE END. The treadmill should be the only appliance in the circuit in
which it is connected. DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock
or fire hazard may result along with computer malfunctions. See Grounding Instructions,
page 4.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and

treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between the

rear of the treadmill and any fixed object.

Keep children away from the treadmill. There are obvious pinch points and other caution

areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

Do not use outdoors.

To disconnect, turn all controls to the off position, remove tether cord, then remove the
plug from the outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

The pulse sensors are not medical devices. Various factors, including the user s movement,

may affect the accuracy of heart rate readings. The pulse sensors are intended only as
exercise aids in determining heart rate trends in general.

Use handrails provided; they are for your safety.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation. SAVE

THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

Advertising