FARGO electronic Maestro 900 - Manual (Page 13)

Confidential, the whole present document is the sole property of Fargo Telecom (Asia) Ltd. 11
3.2.5 AT+IPGPRS
Description:
This command is used to setup GPRS network parameters for the AutoTCPUDP feature.
Syntax:
Command Syntax
AT+IPGPRS=<Cid>,<APN>,<UN>,<PW>
Response Syntax
+IPGPRS: <Cid>,<APN>,<UN>,<PW>
Command Possible responses:
AT+ IPGPRS? +IPGPRS: 1,"INTERNET","" ,””
OK
Note : show current settings
AT+ IPGPRS=1 OK
Note: set Cid value to 1
AT+ IPGPRS =1,”INTERNET” OK
Note: set the PDP value to 1 and APN to “INTERNET”
AT+ IPGPRS=? +IPGPRS: (1-4),(100),(50),(50)
OK
Note: possible values
Defined Values :
<Cid>
PDP context identifier.
Note: to use with AT+AUTOTCP/ AT+AUTOUDP command this value must be set to 1.
<APN>
Access point name of the GPRS network. Max 100 characters.
<UN>
User name to access the GPRS service. Max 50 characters.
<PW>
Password used to access the GPRS service. Max 50 characters.