Fine Digital 400 - Manual (Page 22)

043
F400 042
Park your vehicle at a safe place free of
obstructions
Select the Setting on the Home Screen.
Select the GPS Reset icon.
Tap the GPS Reset icon.
Allow up to 5 minutes for the Finedrive 400 to
locate a GPS signal
Contact Technical Support if your current position
is repeatedly not detectable
Note : If the GPS resetting is done while driving, it will take
much longer to receive a signal.
2.4.4. Setting Touchpad Calibration
In very rare cases, if the Finedrive 400 stops moving completely
and you cannot activate any of the buttons, it could be a
touchpad calibration issue. Use the touch calibration function
when touch pad is not working at all. Try the following
procedure before returning it to the retailer.
Park your vehicle at a safe place
Select the Setting icon on the Home Screen
Select the Volume & Backlight
Select the FM Transmitter in the Audio out menu
Set the desired FM frequency and tap the OK icon
Tune your vehicle FM radio to the frequency set
on the Finedrive 400 and check the audio quality
Repeat changing the Finedrive 400 frequency until
the audio quality is satisfactory
2.4.3. Resetting the GPS
The GPS reset function is helpful when the device doesn°Øt
recognize your current location properly. If the device doesn°Øt
recognize the current location for a while, please try the
following procedure before returning it to the retailer.