Fine Digital 400 - Manual (Page 9)

017
F400 016
a dialog box with the location address displays, tap
the Set Destination option.
The Set Destination screen is shown:
2.2.10.1. Entering an Address
1. Tap Address on the Set Destination screen. The
Input Method screen will appear.
2. Select an Input Method as follows:
2.2.8. Using the Navigation System
2.2.9. Entering a Start Location
The navigation system uses the current location as the starting
point of route calculation. You can enter a new start location
when your navigation system; (1) is not connected to a GPS
receiver, (2) not receiving a GPS signal, or (3) when you want to
select a different point of origin.
To enter a start location, do one of the following:
Tap and hold the pointer on the map location. A
pop up menu with the selected address displays.
Tap the Set Start Location option on the pop up
menu.
Press the Menu button > Destinations icon. Enter the
destination information. For more information, refer
to the Entering a Destination section.
2.2.10. Destinations Management
To enter a destination, do one of the following:
Tap the Menu button > Destinations icon.
T ap and hold the pointer on the map location. When
The calculated route is indicated by a blue line on the map.
If you miss a turn during the route, the navigation system
recalculates the route automatically and displays
“Recalculating Route” on the map display.