FUJITSU V1010 User Manual

Page 90

Advertising
background image

85 - Troubleshooting

Shutdown and Startup Problems

The Suspend/Resume but-
ton does not work.

Suspend/Resume

button is disabled.

In Windows XP, enable the button by going to the Control Panel ->
Power Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the option that best suits your needs.
In Windows Vista, select the “Choose what the power button
does” option.

There may be applica-
tion software. conflict

Close all applications and try the button again.

The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.

The boot sequence set-
tings of the setup utility
are not compatible with
your configuration.

Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the setup
utility and adjust the source settings from the Boot menu. See
“BIOS Setup Utility” on page 41.

You have a secured
system requiring a
password to load your
operating system.

Make sure you have the right password. Enter the setup utility and
verify the Security settings and modify them as accordingly. See
“BIOS Setup Utility” on page 41.

Internal hard drive was

not detected.

Use the BIOS setup utility or Primary Master submenu, located
within the Main menu, to try to auto detect the internal hard drive.

An error message is dis-
played on the screen during
the notebook (boot)
sequence.

Power On Self Test
(POST) has detected a
problem.

See the Power On Self Test (POST) messages to determine the
meaning and severity of the problem. Not all messages are errors;
some are simply status indicators. See “Power On Self Test Mes-
sages” on page 89.

Your notebook appears to
change setup parameters
when you start it.

BIOS setup changes
were not saved when
made and you exited
the setup utility.

Make sure you select Save Changes And Exit when exiting the
BIOS setup utility.

The BIOS CMOS hold-
up battery has failed.

Contact your support representative for repairs. This is not a user
serviceable part but has a normal life of 3 to 5 years.

Problem

Possible Cause

Possible Solutions

Advertising