Fujitsu Siemens Computers P8010 - Manual (Page 7)

7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 3. Drive0 Master Submenu
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Type: ■ Auto
■ None
[Auto] Selects the hard drive device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Setup items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors: --- --- The total number of sectors on your hard disk
Maximum Capacity: --- --- The maximum capacity of your hard disk
Phoenix TrustedCore(tm) Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [Hitachi HTS541612J9SA00]
Type: [Auto] ]
LBA Format
Total Sectors: 234441648
Maximum Capacity: 120GB SATA1
▲
Info System Advanced Security Boot Exit
S y s t e m M e n u