Fisher-Price BARBIE JAMMIN' JEEP H3427 - Manual (Page 13)

H3427a-0920
21
• With the seat at an angle, insert the tabs on the front edge of the
seat into the slots in the foot-well wall
A
.
• Push down firmly on the edge of the seat above each tab to snap
the tabs into the slots B .
• Rotate the back of the seat down C to snap the seat back tabs
into the slots in the vehicle. Push down firmly on the seat back.
• Fit a support to one side of the sport bar.
• Insert a #8- 32 x 1.625" screw through the support, the sport bar
and out through the support.
• Fit a #8 acorn lock nut to the end of the screw.
• While holding the acorn lock nut with an adjustable wrench or pliers,
tighten the screw.
• Repeat this procedure to fasten the other support to the sport bar.
18
20
13
ASSEMBLY F
H3427a-0920
Seat
Seat Back
Tabs
Slot
Tabs
Sport Bar
Supports
• Fit the remaining light covers to the top of the sport bar, as shown.
• Insert a #10 x
1 /
2
" screw into each light cover. Tighten the screws.
Light
Covers
Lights
A
B
C
PUSH
HERE
SIDE VIEW
19
• Insert a #8 x 1" screw into the rear edge of the seat. Tighten
the screw.
BACK VIEW