FUJITSU ServerView Suite V6.10 - Manual (Page 129)

Transfer Time
Start time for transferring the job to the server.
Immediate
Starts the transfer as soon as you click Finish to exit the wizard.
Later
Starts the transfer at the specified time.
Select date, hours and minutes.
Flash Time
Start time of the update phase on the servers.
Immediate after transfer
Starts the update immediately after the transfer.
Later
Starts the update phase at the specified time. If the transfer phase is
not finished at the specified time, the update begins immediately
after the end of the transfer phase.
Boot Time
Start time of the server reboot (only if Reboot = yes or Reboot = dynam-
ic).
If all components contained in the job DO NOT require a reboot or reboot
automatically (Reboot = Auto), the following options are not activated
(grayed out).
ServerView Update Management 129
5.1 Update Manager Main Window