FUJITSU ServerView Suite V6.10 User Manual
Page 241
Return values
0
Update Ok (job status is READY)
All update jobs have been executed without errors.
1
No current job exists (connection established)
2
Timeout (no connection to the managed server)
3
SequenceError - command is not permitted during this phase (a job
has PREPARED status)
If a GlobalFlash Agent up to V 4.71 is installed on your system,
please notice the additional description below.
4
Update with errors (job status is READY)
At least one job could not be executed without errors.
5
GFI error
8
Update ok (job status is REBOOT)
A job is waiting for the reboot to be executed.
9
Update with errors (job status REBOOT)
A job is waiting for the reboot to be executed. However, in addition to
the jobs that have been executed successfully without errors and now
require a reboot, there are also jobs with errors. The reboot must be
executed explicitly by restarting the managed server or using the
Reboot CLI command.
10 Parameter error
11 Memory bottleneck
12 Multiple starting of CLI denied
13 The results file (option -F or logfile.txt) could not be opened.
14 The GFLog.txt log file could not be opened.
16 Rebuild of the inventory in progress. Try again later
17 Check command successfull, reboot needed by at least one com-
ponent
18 Managed server type not supported (virtual server / old offline server)
ServerView Update Management
241
7.1 GFCLI (Command-Line Interface)