Changing the floppy disk drive, 2 changing the floppy disk drive – FUJITSU PRIMERGY B120 User Manual
Page 58
System components and expansions
Accessible drives
50
A26361-K646-Z102-1-7619
8.2.2 Changing the floppy disk drive
Ê
Shut down the operating system.
Ê
Switch off the server, and disconnect it from the network.
!
Switching off the server does not disconnect the device from the network. To completely
disconnect the device from the network, remove the power plug from the line voltage.
Ê
Open the server (see "
Opening and closing the server
").
1
2
3
Ê
Disconnect the cables from the floppy disk drive (1).
Ê
Remove the fastening screw (2) and withdraw the floppy disk drive from the bay (3).
Ê
Push the new floppy disk drive into the bay and secure it with the screw you removed earlier.
Ê
Connect the cables to the floppy disk drive again.
Ê
Close the server again (see "