Fujitsu Siemens Computers B15-1 - Manual (Page 22)

Colour monitor B15-1
20 - English A26361-K905-Z100-2-5E19
Pin assignment D-SUB
1 5
6
10
11 15
Pin Meaning Pin Meaning
1 Video input red 9 +5 V (DDC)
2 Video input green 10 Sync. ground
3 Video input blue 11 Ground
4 Ground 12 DDC-Data
5 Ground 13 H. sync
6 Red video ground 14 V. sync
7 Green video ground 15 DDC Clock
8 Blue video ground
Trouble shooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer and/or with another data cable.
If you are unable to solve the problem, please inform our help desk.
Having this problem? Check the following points:
No display (power indicator does not light) Ê Check whether the monitor is switched on.
Ê Check whether the power cable on the
monitor is connected correctly.
No display (power indicator lights) Ê Check whether the computer is switched
on.
Ê Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê Press any key on the computer keyboard -
the computer may be in energy saving
mode.
Ê Alter the brightness and/or contrast until
you get a picture.
Message:
No Signal
Going to Sleep!
Ê Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
Ê Check whether the computer is switched
on.