Fujitsu Siemens Computers B15-1 - Manual (Page 3)

A26361-K905-Z100-2-5E19 English - 1
Introduction
Your new LCD (Liquid Crystal Display) monitor B15-1 offers numerous features and functions, for
example:
•
TFT display (Thin Film Transistor; active matrix)
•
minimal space requirements thanks to slim casing
•
optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour
purity right into the corners)
•
high degree of brightness and good contrast
•
high resolution (1024 x 768) for displaying the information content of a conventional 17-inch
screen with CRT (Cathode Ray Tube)
•
presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)
•
automatic scanning of horizontal frequencies from 30 to 61 kHz and refresh rates (vertical
frequencies) from 56 to 76 Hz (absolutely flicker-free)
•
digital screen controller with microprocessor for storing 22 different display modes (7 display
modes are preset at the factory)
•
freely adjustable colour alignment for matching the screen colours to the colours of various
input and output devices
•
convenient operation via integrated OSD (On-Screen-display) menu
•
VESA-DDC compatibility
•
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) - mechanical
interface to swivel arm and wall bracket)
•
plug&play capability
•
power management for reducing power consumption when the computer is not in use
•
compliance with the recommendations in accordance with TCO’03
In normal screen mode (dark characters against a light background) the monitor satisfies the
ergonomic requirements for the GS symbol.
This operating manual contains important information you require to start up and run your LCD
monitor.
A screen controller with VGA interface is required to control the B15-1 LCD monitor. The monitor
processes the data supplied to it by the screen controller. The screen controller/the associated
driver software is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see the
"Changing the monitor settings" section in the"Operation of the monitor" chapter).
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
"Important notes" chapter in the operating manual of the computer and in this operating manual.
In the event of any problems occurring, please contact your sales outlet or our help desk.
Additional information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.