Fortinet FortiGate 4000 - Manual (Page 32)

32
Fortinet Inc.
Rear panel features Getting started
Figure 7: FortiGate-4000S rear panel
Power supplies and power connections
The FortiGate-4000 chassis contains 7 power supply modules. Each power supply
can provide a maximum of 350 watts for a total of 2100 watts, in 6+1 hot-swap
redundant configuration that includes load balancing. The voltage range is 100-230
Vac auto range.
The power connections supply AC power to the power supplies. Connect the three
power connections to three separate power outlets. Use the power switch on the
power connector module to turn the FortiGate-4000 chassis power on and off.
A power supply module is powered on when its power on LED turns green.
Figure 8 illustrates the power supply modules and the power connectors.
Figure 8: Power supply modules and power connectors
LAN 2 LAN 1
ON ON
OFF OFF ERR ERR
Management
module
External ethernet
switched interface
modue
Cooling fan trays
LAN 1 LAN 2 COM
SFP SFP HiGig OUT HiGig IN ON OFF
LAN 1 LAN 2 COM
SFP SFP HiGig OUT HiGig IN ON OFF
Power
connectors
Chassis
power
switch
Power supply
modules (7)
Power switch
Power on LED
Fan housing
Locking handle
Internal ethernet
switched interfac
module
10/100 out of ban
management
module
ON ON
OFF OFF
ERR ERR
Power supply
modules (7)
Power switch
Power on LED
Fan housing
Locking handle
Power
connectors
Locking strip Locking screw Locking screw