Fujitsu Siemens Computers LifeBook C2111 - Manual (Page 10)

10
L i f e B o o k C S e r i e s N o t e b o o k B I O S
Exiting from Main Menu
When you have finished setting the parameters on this
menu, you can either exit from the setup utility, or move
to another menu. If you wish to exit from the setup
utility, press the [Esc] key or use the cursor keys to go to
the Exit menu. If you wish to move to another menu, use
the cursor keys.
LBA Mode
Control: n Disabled
n Enabled
[Disabled] Enables or disables Logical Block Addressing in place of
Cylinder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
Transfer Mode: n Standard
n Fast PIO 1
n Fast PIO 2
n Fast PIO 3
n Fast PIO 4
n Multiword DMA 1
n Multiword DMA 2
[Standard] Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
Multi-word DMA is automatically set to mode 1 for Fast
PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast
PIO 4/DMA.
Ultra DMA
Mode: n Disabled
n Mode 0
n Mode 1
n Mode 2
n Mode 3
n Mode 4
n Mode 5
[Disabled] Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field Options Default Description
EarthlingBIOS.fm Page 10 Thursday, June 6, 2002 9:15 AM