Fostex CD-1A - Manual (Page 5)

5
<IMPORTANT!>
When placing a disc on the tray, support the
tray from the bottom by your hand. If you push
the disc to fit into the pivot on the tray without
supporting the tray, the tray/drive may be dam-
aged or broken. Also note that the disc must be
pushed until it clicks so that it is locked into
the pivot securely. Closing the tray without lock-
ing the disc may damage the disc.
• Place the disc with the label side up.
When placing the disc, support the tray from the
bottom by your hand as shown in the illustration
below, and push the disc gently until it clicks so
that the disc is locked into the pivot.
disc
Support the tray from the
bottom by your hand.
Push the disc until it clicks so that the disc is locked
into the pivot.
<Note for removing a disc from the tray>
When removing a disc from the tray, also sup-
port the tray from the bottom by your hand.
Also be careful not to unlock the disc from the
pivot forcibly, which may damage the tray.
Placing/removing a disc
The following are some notes on placing and/
or removing a disc.
<Caution!>
Do not touch the lens when placing a disc
or removing a disc, doing so may dam-
aged may cause a malfunction.