Furuno MU-150C - Manual (Page 18)

11
3.1 Picture Adjustment
Contrast and picture are adjusted with
[S1]: Opens menu; selects menu items.
[S2]: Increases setting.
[S3]: Decreases setting.
[S4]: Initializes setting.
Note: Though “EXIT” is printed on the CONE Board (10P6877), the function of S4 switch is
“RESET.”
ALL RESET
P r e s s R e s e t K e y
Over 2Seconds.
[S1]
[S1]
[S1]
[S1]
[S1]
[S1]
[S1]
Brilliance
(Not used.)
Size (horizontal size for landscape type, vertical size
for portrait type)
Contrast
Center (horizontal position for landscape type, vertical
position for portrait type)
Center (vertical position for landscape type, horizontal
position for portrait type)
Geometry
[S1]
Press [S4] to
Initialize settings
About the picture adjustment buttons
•
The [S2] and [S3] buttons may be pressed and held down to increase/decrease setting
more rapidly.
•
The [S4] button can initialize settings individually or all at once. Press it at after
adjustment of a specific setting, or at the “ALL RESET” screen to initialize all picture
adjustment settings.
•
The adjustment display disappears if there is no adjustment within five seconds.