Firex 591S User Manual

Duct smoke detector remote accessories, Strobe connection, New accessories

Advertising
background image

The professional choice in fire safety.

The NEW remote accessories are designed to be used with
Firex duct smoke detectors to provide the most complete
functionality ever available in such a device.

The remote accessory is available with either the single gang
remote indicator/control (591 models), or with the addition of
a single gang strobe assembly (592 models). Both versions
are compatible with standard Decora style cover plates
(choice of white, red or stainless steel). A strobe-only version
(593 models) is available for retrofit upgrade of “controller
only” installations.

The indicator/control assembly provides:

Visual indication of detector Pilot, Trouble and Alarm
Functions

Selectable audible indication of Alarm, Trouble or both

Buzzer Silence function, with silenced indication and
“ringback” following condition correction

Lamp/Buzzer test function

Key-Operated detector Test and Reset functions

Lever-operated “No-Tools” terminal block

Port for plugging in the optional strobe assembly

Black “DUCT SMOKE DETECTOR” decal included for
front plate

Blue “SMOKE”, red “FIRE” strobe lens decals included for
both horizontal and vertical mounting

Strobe Connection

The strobe assembly provides visual indication of alarm
conditions, and is connected to the indicator/control
assembly via the provided polarized connector.

To install the strobe module, simply plug the provided
connector onto the pins as indicated on the rear of the
indicator/control module. Snap the strobe lens into the cover
plate, and install cover plate following completion of remote
module wiring.

NOTE: The strobe and audible buzzer features are not ADA
compliant, and not intended for life safety notification or
evacuation purposes (public mode). These functions are for
duct smoke detector status indication only (private mode).

Duct Smoke Detector
Remote Accessories

Universal Voltage Models Compatible with
230 VAC, 115 VAC, 24 VAC or 24 VDC operation

2650-760 Ionization • 2650-761 Photoelectric

2650-660 Ionization • 2650-661 Photoelectric

2650-560 Ionization • 2650-561 Photoelectric

NEW ACCESSORIES

591S

592SC

Audible Buzzer Configuration

There are two jumpers located on the rear of the
indicator/control assembly. To enable audible buzzer
operation for Alarm or Trouble conditions, simply leave the
jumpers in place. To disable either or both functions,
remove the appropriate jumper(s).

TBL

ALM

Buzzer will

function on

both Alarm

and Trouble

Conditions

Buzzer will

function on

on Alarm

Condition

only

Buzzer will

function

on Trouble

Condition

only

Buzzer

will not

function

on Alarm

or Trouble

Conditions

TBL

ALM

TBL

ALM

TBL

ALM

Advertising
This manual is related to the following products: