FujiFilm A330 - Manual (Page 18)

35
Advanced
Features
3
34
1 Press the “Playback” button for approx. 1
second to turn the camera on in Playback mode.
2 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “d” or “c” to select “u” DPOF.
HOW TO SPECIFY PRINT OPTIONS (FRAME SET/RESET)
1
0 1 0 2
o ERASING SINGLE / ALL FRAMES
PLAYBACK MENU
FRAME
1 Press “d” or “c” to select the frame (file) to be
erased.
2 Press the “MENU/OK” button to erase the
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and 2.
When you have finished erasing frames (files),
press the “DISP/BACK” button.
● ! Pressing the “MENU/OK” button repeatedly erases
consecutive frames (files). Take care not to erase an frame
(file) by mistake.
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.38).
ALL FRAMES
Pressing the “MENU/OK” button erases all the
frames (files).
● ! To cancel the erasing of frames once it is in progress, press
the “DISP/BACK” button. Even if you stop the procedure
immediately, some frames (files) will be erased.
● ! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (
➡P.38).
◆
To stop the procedure mid-way
◆
To cancel erasing of all the frames (files) while it is in
progress, press the “DISP/BACK” button. Some
unprotected frames (files) will be left unerased.
0 1 0 2
If “
†
” appears, press the “MENU/OK” button again to erase the frames (files).
● ! Even if you stop the procedure immediately, some frames
(files) will be erased.
u DPOF SET FRAME
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix
A330/FinePix A340.
On the FinePix A330/FinePix A340, you can specify only one print per image in the
DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
¬
…
( ➡P.34)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
( ➡P.36)
When you insert an xD-Picture Card that contains images specified for printing on
by another camera, those print specifications are all reset and replaced by the new
print specifications.
µ
( ➡P.79)
Up to 999 images can be specified on the same xD-Picture Card.
HOW TO SPECIFY PRINT OPTIONS (DPOF)
During playback,
check that “
u ”
appears for the DPOF
settings that have
been specified.
Continued