FujiFilm A330 - Manual (Page 35)

69
Viewing
Images
6
6.4 USING FinePixViewer
For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help
menu for details.
■ Example: Looking up slide shows
1 Click “How to Use FinePixViewer” in the FinePixViewer Help menu.
2 Click “Basic Operation” and then click “ Basic Slide Show Operations” in the menu that appears.
3 The “Basic Slide Show Operations” information appears. Press the “<<<” key to view the
previous page or the “ >>>” key to view the next page.
6.4.1 Mastering FinePixViewer
Only perform this operation when you no longer require the installed software or when the software
was not installed correctly.
1 Check that the camera is not connected to the PC.
2 Quit all currently running applications.
3 Open the “My Computer” window, open the “Control Panel”,
and double-click “Add/Remove Programs”.
6.4.2 Uninstalling the Software
Windows
◆
Macintosh
◆
h To read “How to Use FinePixViewer”...
You must install Adobe Systems’ Acrobat Reader. See P.57 for information on installing Acrobat
Reader.
● ! For more information on using Acrobat Reader, refer to the Acrobat Reader “Help” menu.
h What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics, including batch processing and ordering prints.
4 The “Add/Remove Programs Properties” window appears.
Select the software to be uninstalled (FinePixViewer or the
driver) and then click the [Add/Remove] button.
<To remove the driver software>
<To remove FinePixViewer>
Continued 68
AC-3V
(USB)socket
Camera
6.3 CONNECTING TO A COMPUTER
OFF
2 1 When the “It is now safe to disconnect the
camera” message appears, click the [OK] button
and disconnect the camera.
2 Turn the camera off.
3 Unplug the USB cable (included) from the
camera.
0 2
0 3
6.3.2 Disconnecting the Camera
1 Windows
Once the image has been saved, the “Remove Camera/Media” window appears (Save Image
Wizard Windows). To disconnect the camera, click the [Remove] button.
Macintosh
Once the image has been saved, the “Remove camera/media” window appears (Save Image
dialog box). To disconnect the camera, click the [OK] button.